Hitachi PSC-A32MN Manual De Instalación Y Funcionamiento página 46

Operation
5.2.3.5 Permission/prohibition of operation from remote control switch
This function is used for prohibiting the operation from the remote control switch (RCS).
When the remote control switch is set as prohibited (by item / for all Items), the control of the selected item becomes unavailable.
The items that can be selected are: Run/Stop, operation mode, fan speed, swing louvre and temperature.
?
N O T E
Pay attention to the following when applying prohibition by Item to a group.
• When setting "Remote control operation," do not use the function control lock of the remote control switch.
- When using at the same time, "Remote control operation" and control lock functions, "Remote control operation" is prior and the control lock
function cannot be set.
- When changing setting from "All prohib." to "All permitt." at "Remote control operation", all the setting for the control lock of the remote control
switch will be cancelled.
1 Select the target group for setting the prohibition of RCS operation at the "Monitor (All Groups)" or "Monitor (Block)" screens. The
window for change of the settings of the selected group is then displayed on the touchscreen.
Monitor (All Groups)
(1)
2 Select the "Remote control operation" by tapping on it.
38 PMML0332A rev.0 - 05/2015
Monitor (Block)
(1)
(2)