Publicidad
Idiomas disponibles
Idiomas disponibles
Operation
5.3 MENU
The table below shows the menu items and their functions.
Item
Filter Sign Reset
Schedule Setting
Schedule Timer Setting
Holiday Setting
Schedule Timer ON/OFF
Setting
Adjusting Remote Control
Switch Setting Temperature
Range
Date and time settings
Display of screen for cleaning
Touchscreen Calibration
Group Name Register
Screen Display Setting
Brightness
Language Setting
Temperature Unit
Accumulated Operation Time
Contact Information
Summer Time Setting
40
PMML0332A rev.0 - 05/2015
This function is used for turning off the filter sign display of indoor units in which filter sign has occurred.
Regardless of the occurrence of the filter sign, it is also possible to reset the display time of the filter sign in the
air conditioner units.
This function is used to start and stop the operation of air conditioners at the desired time.
It is possible to set the schedule in block and group units.
This function is used for setting the time (by the minute), "Run/Stop" and temperature (19~30ºC).
For weekly schedule setting, up to 10 schedule items can be set per day.
It is also possible to copy the setting contents.
This function is used for suspending the schedule operation temporarily.
Scheduled operation remains suspended when the day is set as holiday.
This function is used for setting irregular holidays such as national holidays.
"Schedule Timer OFF Setting" is used for suspending scheduled operation for the target group.
Scheduled operation remains suspended when Schedule Timer is OFF.
This function is used for long holidays, sudden holidays, national holidays, etc.
This function is used for limiting the setting temperature range of the remote control.
It is possible to define a minimum setting temperature for cooling and a maximum setting temperature for
heating.
This function is used for adjusting date and time.
This function is used when cleaning the LCD screen of the central station.
The screen returns to "Menu" when it is not tapped for 10 seconds.
This function is used for calibrating (correcting) the recognition position of the touchscreen of the control.
This function shall be used when there is a continued lack of response to the press of the buttons displayed on
the screen.
This function is used for registering the names of blocks and groups.
The maximum length allowed for the name of each block or group is of 16 characters. It is also possible to copy
names
If a group or block is registered without a name, it is registered as "Group 1" or "Block 1" automatically.
These functions are used for adjusting settings related with the screen display.
This function is used for adjusting the brightness of the touchscreen display.
This function is used for changing the display language.
This function is used for changing the temperature unit.
This function is used for indicating the accumulated operation time of the air conditioner.
• The value of accumulated operation time is displayed by month.
• The operation time is displayed for 16 months, including the current month.
• It is also possible to display "Thermo ON time" by setting the appropriate controller option.
This function is used for displaying the service contact address and the latest alarm code.
This function is used for setting the summer time operation.
Function
Publicidad
