Descargar Imprimir esta página

Hitachi PSC-A32MN Manual De Instalación Y Funcionamiento página 72

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 95
Operation
5.4 SERVICE MENU
?
N O T E
This switch is for the serviceman only. Therefore do not use it.
If this switch is used and the service menu is indicated on the screen, tap "Back". The screen will return to the menu.
Items
Group Register
Setting of control patterns
Main Unit Register
Sub Unit Register
Display list of registers
Optional Function Setting
Air Conditioner, Remote Control
Switch Setting
Controller Setting
Exception Setting of Run/Stop
Operation
External Input/Output Setting
Button Setting
Contact Information Register
Memo
Restore Setting
Checking Connection
Alarm History
64
PMML0332A rev.0 - 05/2015
The connected indoor units are checked by the central station in the same H-LINK. This function is used for
the group or block registration of them.
Set the control pattern.
This function is used for the main unit registration in the each remote control group. (The main unit is the only
one (1) in the one (1) remote control group.) The control command is sent from the central station to the main
unit for the remote control group.
This function is used for registration of the sub units except the main unit in the same remote control group.
In the case of using the remote control switches or the receiver kits as follows, the sub units are registered
automatically by the central station after the main unit registration.
The remote control switches and the receiver kits which model names start from PC-A**.
The remote control switches which model names start from PC-P**.
Display the address of the Indoor Units which were registered in each group
This function is used for setting and changing of the optional functions for the air conditioners and the central
stations.
Set or change the optional function of the air conditioner and remote control switch.
Set or change the operation mode or the color of the operation indicator of the central station.
This function is used to specify exceptional Groups/Blocks for All Run/Stop command. The All Run/Stop
command will not be affected by the specified group/block.
There are 4 inputs and 2 outputs for external Input/Output function in the central station.
This function specifies each button to be shown/hidden.
This function also includes specification/setting for "one-tap operation" or "press and hold" operation.
This function is used for editing the contents of contact information registration.
Record and Browse the Test Run and Maintenance Informations
This function is used for restoring all the settings such as registered Groups (Blocks) and schedules.
This function is used for checking of the connected indoor unit numbers in the same H-LINK.
When this function is used, the confirmation for the keeping of registered information such as the group
names, schedules, etc. will be indicated.
If "OK" is tapped, the connected indoor unit numbers are updated with keeping the registered information. If
"Cancel" is tapped, the setting of the central station is all restored.
This function is used for displaying the list of alarm history that occurred in the air conditioner and the
controller. (Maximum 100 records)
Contents

Publicidad

loading