Hitachi PSC-A32MN Manual De Instalación Y Funcionamiento página 18

Electrical wiring
DSW1 Setting
Combination of
Other central
PSC- A32MN with other
controllers
central controllers
Without other central controllers
(1) Check compatibility limitations in CSNET Web PSC-A160WEB1 Manual.
2 Close the unit case until hearing a snapping sound, and make sure that the front and rear parts of the case close fully. At this
time, check that connection bands are not trapped between the front and the rear parts of the case.
a. Hook the tabs into the front side of the case.
b. The front side of the case will close when hooking up the tabs of the lateral and lower sides.
Front case
10 PMML0332A rev.0 - 05/2015
Name
Central Station EZ
Central Station mini
Central Station
Centralised ON/OFF Controller
BMS Gateways
CSNET
To attach the touch pen holder
When attaching the touch pen holder to the controller,
Rear case
insert the chip into any of the attaching holes for the
holder until hearing a click.
Catch
for
fixing
(6 catches)
Connection band
Model DSW1
PSC-A64GT OFF
PSC-A32MN OFF
PSC-A64S OFF
PSC-A16RS OFF
HC-A(8/64)MB
HC-A16KNX
KNX001
HARC-BX E (A/B)
CSNET Manager LT
CSNET Manager XT
CSNET WEB (1) OFF
OFF
Copper
Hole for touch pen holder
DSW2 DSW3 DSW4
OFF OFF OFF
OFF OFF OFF
OFF OFF OFF
OFF OFF OFF
Not compatible
Not compatible
Not compatible
Not compatible
Not compatible
Not compatible
OFF OFF OFF
OFF OFF OFF