Publicidad
Idiomas disponibles
Idiomas disponibles
Operation
5.3.3 Scheduled settings
This function is used for timer operation.
It is possible to set a schedule for a block and for each group.
A holiday setting independent of the schedule is also available.
5.3.3.1 Schedule timer settings
Timer setting for weekly schedule
1 Select "Schedule Settings" at the "Menu" screen.
2 Select "Schedule Timer Setting" at the "Schedule Settings" screen.
(1)
3 Select the target (all groups, block or group).
•
The buttons of the groups with schedule setup are shown in blue.
•
The buttons of the groups with no schedule setup are shown in grey.
4 Select the target day of the week (from Monday to Sunday).
5 Select the schedule item number (from 1 to 10).
(3) Block
(3)
Group
6 Set the schedule time, run/stop operation and temperature parameters.
•
Select the schedule item No. (1~10) and set the time.
•
Select "ON" , "OFF" or "Unspe".
•
Set the temperature by tapping " " or " ".
•
"- -" is shown in case that there are no settings for the change of a particular parameter, such as operation mode or temperature.
44
PMML0332A rev.0 - 05/2015
(3) All Groups
(2)
(4)
(5)
Publicidad
