Publicidad
Idiomas disponibles
Idiomas disponibles
Operation
5.1.6 Setting of control patterns
After adjusting date and time settings, the control pattern screen is displayed. Tap "Set" on the touchscreen to proceed to the setting
of control patterns.
When tapping on a control pattern button, the selected button is highlighted with an orange outline. The procedure for the setting of
control patterns is explained below.
1 Select "Group Register" on the Service Menu screen.
2 Select "Setting of control patterns" on the Group Register screen.
(1)
3 Set the Control Pattern.
When tapping on the Control Pattern button, the selected button is highlighted with an orange outline.
4 Tap "Setting completed".
* In case of tapping "No", the screen returns to the Group Register menu.
* Group registration is deleted when changing to a different control pattern.
5 Tap "Yes" on the confirmation screen.
* Tap "No" to return to the "Control pattern setting" screen.
(3)
6 Tap "No" on the confirmation screen to confirm the selected control pattern and to delete all group registers.
* Tap "No" to confirm the selected control pattern. After modifying the control pattern, the assignment of main and sub units is
maintained as much as the control range allows.
7 The Control Pattern update screen is displayed. After updating the Control Pattern, the Group Register screen is displayed for
the selection of a Main Unit.
(6)
16
PMML0332A rev.0 - 05/2015
(4)
(5)
(7)
(2)
Publicidad
