Descargar Imprimir esta página

GE Profile PFDS450 Manual Del Propietario E Instalación página 11

Publicidad

Idiomas disponibles

Idiomas disponibles

About d
er features (cont.).
GEAppliances.c
To Use the Built-In
Hook for
Hanging
Garments
1. Make sure the drum of the dryer is
oriented so the hook is on the top
center of the dryer.
2. Using your finger, pull the hook out of
the baffle.
3. Hang the garment on a hanger, hang
the hanger on the hook and close the
door.
4. Press the DRYERRACK button.
5. Select the desired time.
6. Press the START/PAUSE button.
Reverse
Tumble'"
All Profile front-loud matching dryers are equipped with the Reverse mumbW" feature,
as part of the Duo Dry Plus system'L By reversing the direction of drum rotation during
the drying cycle, your dryer will tangle the clothes
loud less, dry more evenly and
improve drying times. Typical loads such as bed and bath mixed loads, where sheets,
towels and pillow cases are laundered
together,
benefit from this capability. When
the dryer reverses
direction, there will be a slight pause and sound change. This is
normal. Alldryer cycles utilize this feature, except when the rack dry option is selected,
in which case the drum does not tumble.
Using the dryer.
Always follow fabric manufacturer's
care label when laundering.
Sorting
and
Loading
Hints
As u general
rule, if clothes
are sorted
properly for the washer, they are sorted
properly for the dryer. Try also to sort items
according to size. For example, do not dry a
sheet with socks or other small items.
Do not add fabric softener
sheets
once
the load has become
warm. They may
cause
fabric
softener
stains.
Bounce ®
Fabric Conditioner Dryer Sheets have been
approved for use in this dryer when used
in accordance
with the manufacturer's
instructions.
See below for lint filter cleaning instructions.
Do not overload. This wastes energy and
causes wrinkling.
Do not dry the following items: fiberglass
items,woolens, rubber-coated items, plastics,
items with plastic trim and foam-filled items.
11

Publicidad

loading