Publicidad
Idiomas disponibles
Idiomas disponibles
Installation
Instructions
REVERSING THE DOOR SWING (if desired}
BEFORE YOU START
Unplug the dryer from its electrical
outlet.
rfl REMOVE THE DOOR ASSEMBLY
Remove the side hinge cap by opening the dryer
door and removing
the screw from behind the
hinge (#8 x .375" tapping screw). Then using your
hand, pop the hinge cap off the dryer.
lxC
o
Hinge
[_] REMOVE THE DOOR ASSEMBLY (cont.}
Close and hold the door, remove the 2 hinge screws
(#10 x 0.75" topping
screws). Pull the door away
from the dryer front panel.
/
i
/
i
t
i
//
i
t
/
r_ DISASSEMBLE THE DOOR ASSEMBLY
Lay the door down on a soft, protected,
flat surface
so that the inner port faces upward
(door resting on
the handle side).
Remove the 7 screws (#10 x 1.125" tapping
screws)
located around the perimeter
of the door.
Turn the door assembly over and separate the
chrome cover from the inner door. Put the inner
door aside on a soft, protected
flat surface.
35
Publicidad
