Publicidad
Idiomas disponibles
Idiomas disponibles
English
13. Connecting the dust extractor (Sold separately)
(Fig. 55)
Do not inhale the harmful dusts generated in cutting
operation.
The dust can endanger the health of yourself and
bystanders.
Use of dust extractor can reduce dust related
hazards.
By connecting with dust extractor through adapter,
joint and dust collection adapter, most of dust can be
collected.
Connect the dust extractor with adapter.
(1) Connect in order of hose (id 38 mm x 3 m long) and
adapter*
2
, joint (C)*
with the duct of power tool.
Connection is done by pressing in the direction of the
arrow. (Fig. 55)
The dust collection adapter*
hose band*
1
.
*1 Optional accessory
*2 Dust extractor's standard accessory
Dust extractor
Hose (id 38 mm)
Adapter*
2
1
Joint (C)*
Hose band*
OPTIONAL ACCESSORIES...sold separately
○ Joint (C) (Code No. 337526)
○ Dust collection adapter (with hose band) (Code No.
376291)
14. Using the AC/DC adapter ET36A (sold separately)
WARNING
Using the tool without securing the power cord
could result in contact between the saw blade
and cord that could result in electric shock.
38
1
and dust collection adapter*
1
is fixed to the duct by a
Dust collection adapter*
1
Duct
Fig. 55
(1) Using a Phillips screwdriver, firmly fasten the hook to
the holder (A) with the screw. (Fig. 56)
*1 Optional accessory
1
(2) Press down the saw head and secure in place with
locking pin. (Fig. 57)
(3) Slide the saw head until it comes into contact with the
front and secure the head with the slide securing
knob. (Fig. 57)
Press down the
1
motor head and
secure
1
(4) Attach ET36A to the tool and secure the cord with the
hook so that the cord is taut. (Fig. 58)
Holder (A)
Cord holder
FT screw
Fig. 56
Slide motor head
2
towards the front
and secure
Fig. 57
*1
*1
Publicidad
