Keysight DAQ970A Guia Del Usuario página 131

Multiplexer modules: Switch mode
The multiplexer modules (DAQM900A, DAQM901A, DAQM902A, and DAQM908A) are also able to operate in switch
mode which enables you to open and close channels independently. The section below will describe the steps to
enable and configure the switch mode.
1. Press the [Channel] key to access the Channel menu. In the example below, Channel 101 of a DAQM901A
module in slot 1, labeled as OVEN is set up to measure temperature in degrees °C using a type J thermocouple.
2. Press the [Module] key to go to the Module menu. Next, press the Scan List softkey.
Keysight DAQ970A/DAQ973A User's Guide
3 Features and Functions
131