Publicidad
Idiomas disponibles
Idiomas disponibles
3 Features and Functions
Save to USB
This option is only available when DMM Digitize, or Digitizer is selected as the data acquisition mode.
The Save to USB softkey similarly allows you to save digitized data to a USB drive connected to the front panel USB
host port. The USB annunciator is displayed whenever a USB drive is connected. Upon pressing the Save to USB
softkey, the following options will appear:
Softkey
Auto Save
On/Off
Separator
186
Description
Toggling the
Auto Save softkey will enable ( On ) or disable ( Off ) the instrument from saving the digitized
data to a USB drive connected to the front panel USB host port. If
begin saving the data file into the USB drive when the digitizer operation is complete.
If the instrument does not detect a USB drive, it will prevent the instrument from ini-
tiating a digitizing process until a USB drive is detected or the Auto Save function is dis-
abled.
You may start viewing the results in the
running in the background.
Pressing the
Separator softkey will allow you to specify the character ( Comma , Tab , or Semicolon ) to be
used for separating the information on each row in the data file.
This setting is only available when
mode.
Auto Save is enabled, the instrument will
[View] menu while the Auto Save operation is
DMM Digitize is selected as the data acquisition
Keysight DAQ970A/DAQ973A User's Guide
Publicidad
