Publicidad
Idiomas disponibles
Idiomas disponibles
Log to USB
The option is only available when Scan is selected as the data acquisition mode.
The Log to USB softkey allows you to log scanned memory readings to a USB drive connected to the front panel USB
host port. The USB annunciator is displayed whenever a USB drive is connected. Upon pressing the Log to USB
softkey, the following options will appear:
Softkey
Logging
# Rows
Separator
Log to
New file
Keysight DAQ970A/DAQ973A User's Guide
Description
Toggling the
Logging softkey will enable ( On ) or disable ( Off ) logging of the scanned memory readings to
a USB drive connected to the front panel USB host port. When USB data logging is enabled, readings are
saved to files in the USB drive. However, the readings will not be restored to reading memory after power
is cycled.
Pressing the
# Rows softkey will allow you to specify the row limit (maximum number of rows for sweep
data) that will be written to each data logging file. You may choose from three options:
each data logging file is 65,536 rows per file),
per file), or
Infinite (the limit is the number of bytes allowed by the file system - up to 4 GBytes or avail-
able storage space.)
Pressing the
Separator softkey will allow you to specify the character ( Comma , Tab , or Semicolon ) to be
used for separating the information on each row.
The Log to New file softkey will appear when data logging is in progress. Each time the
softkey is pressed, it will log the data to a new file.
3 Features and Functions
1M (the limit of each data logging file is 1,048,576 rows
65k (the limit of
Log to New file
183
Publicidad
