Publicidad
Idiomas disponibles
Idiomas disponibles
3 Features and Functions
DAQM907A - Multifunction Module
The following section describes how you may configure each of the channels on the DAQM907A. There are total 7
channels available in the DAQM907A multifunction module as shown in the table below:
Channel number
01
02
03
04
05
06
07
Digital I/O (DIO) Channels (Channel 01 and 02)
The DAQM907A multifunction module has two non-isolated 8-bit input/output ports which you can use for reading
digital patterns. You can read the live status of the bits on the port or you can configure a scan to include a digital
read.
Configure the DIO channel
1. Press [Module] and use the knob or the front panel arrow keys to select the slot containing the multifunction
module.
134
Channel label
8-bit Digital I/O Channel
8-bit Digital I/O Channel
Totalizer Channel
DAC Output Channel
DAC Output Channel
DAC Output Sense Channel
DAC Output Sense Channel
Keysight DAQ970A/DAQ973A User's Guide
Publicidad
