Publicidad
Idiomas disponibles
Idiomas disponibles
Display
Off/On
Markers
Markers softkey
Markers determine a range of data points which are used to compute the quick measurements and statistics. In the
image above, the two markers which are represented by green vertical lines and labeled M1 and M2 respectively.
Between Marker 1 and Marker 2, there will be a minimum of 256 data points.
Softkey
Markers
Marker 1
Marker 2
LockMrkrs
On/Off
Keysight DAQ970A/DAQ973A User's Guide
Display Off/On softkey to enable ( On ) or disable ( Off ) the display of the quick measurements
Toggle the
data or statistics data. This setting will be reflected on all the other channels.
The
Display Off/On softkey will only appear when an analysis mode ( Statistics
or a
Quick M. option) is selected .
Please refer to
Markers softkey
Description
Press the
Marker 1 softkey and use the knob or arrow keys to adjust the position of Marker 1 (M1).
Press the
Marker 2 softkey and use the knob or arrow keys to adjust the position of Marker 2 (M2).
Press the
LockMrkrs softkey to toggle between locking the positions of M1 and M2 in a fixed
distance (
On ) or allowing the position of M1 or M2 to be adjusted independently of each other ( Off ).
in following section for more information.
3 Features and Functions
87
Publicidad
