Publicidad
Idiomas disponibles
Idiomas disponibles
in the car. In this case, the digital
charging display
a car is connected:
The LED strip
4
up white.
Some cars carry out a test charge
first for a few seconds. In this
case, the digital charging display
indicates that the charger
3
is ready to charge at the time
programmed in the car:
Other cars take a very low charge
current, before the actual charging
at the time programmed in the car.
In this case, the digital charging
display
already indicates that
3
the car is being charged:
The LED strip
4
ally in a circle and indicates that
current is flowing into the car
(however this is almost zero)
The digital charging display
indicates the charging time
the energy supplied
charging capacity
indicates that
3
continues to light
1
flashes continu-
3
,
13
, and the
14
.
15
Finish the charging process
and disconnect from the
vehicle:
The charging process will stop
„
automatically at the time pro-
grammed in the car. The digital
charging display
the charging process is complete:
The LED strip
green.
If the charging timer in the car
„
is deactivated, then finish the
charging process in the car.
The charging process will be
„
stopped. The digital charging
display
indicates that the
3
charging process is complete:
The LED strip
green. On the display
read off the charging time
the energy supplied
Unplug the plug
„
and put the cover cap
plug
.
8
Wind the electric car connection
„
cable
up without kinks.
7
The charger
„
mode automatically after approx.
10 minutes, if the button
pressed.
GB/IE/NI/CY/MT
indicates that
3
lights up fully in
4
lights up fully in
4
you can
3
13
.
14
from the car
8
on the
9
goes into standby
1
is not
2
19
and
Publicidad
