Publicidad
Idiomas disponibles
Idiomas disponibles
End the charging process
on the charger
If, during charging, the button
„
is pressed for approx. 5 seconds,
the charging process will stop.
The digital charging display
indicates that the charging
3
process is complete:
The LED strip
green. On the display
read off the charging time
the energy supplied
By pressing it again for approx.
5 seconds, a new charging pro-
cess can be activated. The digital
charging display
a car is connected:
20
GB/IE/NI/CY/MT
:
1
lights up fully in
4
you can
3
and
13
.
14
indicates that
3
The LED strip
up white.
The charge current can be
selected again by pressing the
2
button
However if you want to disconnect
the charger
proceed as follows:
Finish the charging process on
„
the car.
Unplug the plug
„
and put the cover cap
plug
.
8
Wind the electric car connection
„
cable
7
The charger
„
mode automatically after approx.
10 minutes, if the button
pressed.
Voltage failure:
If there is a voltage failure, the
charging process will automatically
resume once the voltage returns.
continues to light
4
within 5 seconds.
2
from your car,
1
from the car
8
up without kinks.
goes into standby
1
on the
9
is not
2
Publicidad
