Toro eTimeCutter eMR4275 Manual Del Operador página 16

Decal Part: 147-7616
Note:
This machine complies with the industry standard stability test in the static lateral and
longitudinal tests with the maximum recommended slope indicated on the decal. Review the
instructions for operating the machine on slopes in the Operator's Manual as well as the
conditions in which you would operate the machine to determine whether you can operate
the machine in the conditions on that day and at that site. Changes in the terrain can result
in a change in slope operation for the machine.
Warning—read the Operator's Manual.
Warning—before performing maintenance, engage the parking brake and remove the key.
Cutting/dismemberment hazard of hand—keep away from moving parts; keep all guards and shields in place.
Thrown object hazard—keep bystanders away; pick up debris; keep the deflector in place.
Tipping hazard—do not use dual ramps when loading onto a trailer; use 1 ramp wide enough for the machine;
use a ramp with an incline less than 15°; back up the ramp when loading the machine and drive forward off the
ramp when unloading.
Runover hazard—do not carry passengers; look down and behind you when moving in reverse.
Tipping hazard—do not use the machine near drop-offs with slopes greater than 15°; only operate across slopes
less than 15°.
Decal Part: 147-7619
Safety: Safety and Instructional Decals
decal147-7619
Page 2–10
decal147-7616
Fast
Slow
Neutral
Reverse
Traction controls
3445-793 A