Descargar Imprimir esta página

Toro eTimeCutter eMR4275 Manual Del Operador página 50

Ocultar thumbs Ver también para eTimeCutter eMR4275:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

Electrical System Maintenance
Preparing the Battery Pack for Recycling
Upon removal, cover the terminals of the battery pack with heavy-duty adhesive tape.
Do not attempt to destroy or disassemble the battery pack or remove any of its
components.
Checking the Battery-Box Filter
1. Park the machine on a level surface, disengage the blade-control switch (PTO), and
engage the parking brake.
2. Shut off the machine and remove the key.
3. Open the battery box filter cover behind the
seat.
4. Clean the filter by tapping it gently to remove
dust.
Note:
filter with a new one.
5. Install the filter.
6. Install the filter cover.
Maintenance: Electrical System Maintenance
Lithium-ion battery packs labeled with the Call2Recycle seal can be recycled at any
participating retailer or battery recycling facility in the Call2Recycle program (US and
Canada only). To locate a participating retailer or facility closest to you, please call 1-
800-822-8837 or visit www.call2recycle.org. If you cannot locate a participating
retailer or facility nearby, or if your rechargeable battery is not labeled with the
Call2Recycle seal, please contact your local municipality for more information on how
to responsibly recycle the battery. If you are located outside of the US and Canada,
please contact your Authorized Service Dealer.
If it is very dirty or damaged, replace the
IMPORTANT
G455145
Page 5–4
3445-793 A

Publicidad

loading

Este manual también es adecuado para:

75642