Toro eTimeCutter eMR4275 Manual Del Operador página 66

Display Error and Fault Code Troubleshooting
Before diagnosing an error, shut off the machine, remove the key, and remove the batteries.
Error Icons
Fault codes appear on the information display as shown.
Identify the system of the fault using the first 2 digits of the code and the first table, then
identify the fault using the last 2 digits of the code and the table of the appropriate system.
The middle 3 digits correspond to the last 3 digits of the controller serial number, which may
help determine which motor is sending the fault.
Note:
The serial number does not display for PMU faults and shows 000 instead.
Troubleshooting: Display Error and Fault Code
Troubleshooting
Description
Icon
The battery temperature is too
high.
The battery load is too high.
The motor temperature is too
high.
The motor load is too high.
Fault code
G460280
Page 7–4
Corrective Action
1. Shut off the machine,
remove the battery, and
wait for the battery to cool.
2. Operate the machine in
the appropriate
temperature range.
Reduce the load on the
machine.
1. Shut off the machine and
allow it to cool before
starting it again.
2. Operate the machine in
the appropriate
temperature range.
Reduce the load on the
machine.
Refer to the following tables.
System
Last 3 digits of the controller serial
number
Fault code
3445-793 A