Toro eTimeCutter eMR4275 Manual Del Operador página 37

Driving the Machine (continued)
2. Slowly push the motion-control levers forward
or rearward. Move 1 lever farther than the
other lever to turn.
Note:
control levers, the faster the machine moves in
that direction.
3. To stop, pull the motion-control levers back to
the N
EUTRAL
Note:
the machine in emergency situations or when
a machine fault disables the traction controls.
3445-793A
The farther you move the motion-
position.
You can use the parking brake to stop
G397314s
Page 4–12 Operation: During Operation