Beissbarth MT ZERO 6 Touch Manual De Instrucciones página 100

en 100 | MT ZERO 6 Touch | Initial commissioning
9. Install the interface card plate on the machine.
Proceed with caution.
!
Make sure not to crush the cables between the
structure and the plate.
Fig. 33: Installing the interface card plate
!
To avoid damaging the cables, make sure the
cables are not excessively taut and have freedom of
movement in their notches.
10. After completion of the connections described,
install the cover of the wheel guard moving unit.
Fig. 34: Installing the cover
|
1 695 600 965 2020-02-27
4.8 Installing the monitor
1. Remove the monitor mount.
2. Use the screw set included in the scope of delivery
to install the mount on the back of the casing.
2
1
1 2
2
1
2
1
Fig. 35: Installing the monitor mount
3. Remove the monitor.
4. Install the monitor on the mount.
2 3
2 3
1
1
2 3
1
1 2
Fig. 36: Installing the monitor
"
This concludes the installation of the monitor.
1 2
M8x25 8,4x16x1,5
1
M4x8
2
5x20x2,5
3
3
Beissbarth GmbH