Beissbarth MT ZERO 6 Touch Manual De Instrucciones página 85

1.2.1 Safety symbols
Symbols
* Version with positioning laser only
M = MT ZERO 6 Touch AWx
1
P = MT ZERO 6 Touch AWxP
2
1.2.2 Certification symbols
Symbols
M = MT ZERO 6 Touch AWx
1
P = MT ZERO 6 Touch AWxP
2
Beissbarth GmbH
Description Definition
WARNING Indicates the type and properties of the laser
equipment used on the product and the immediate
There are devices fit-
risks of exposure.
ted to the product
that use laser beams!*
WARNING Indicates the positions of the laser devices.
Source of the laser
beam!*
DANGER – live parts Risk of injury, heart failure or death from electric shock
when touching live parts (e.g. main switch, circuit
when opening the
boards).
MT ZERO 6 Touch!
R Work on electrical systems or equipment must only
be performed by qualified electricians or trained
personnel under the guidance and supervision of an
electrician.
R Disconnect the MT ZERO 6 Touch from the mains
voltage system before opening.
DANGER – live parts The inside of the machine can be accessed 1 minute
after the machine is switched off.
when opening the
Only customer service is authorized to remove the
MT ZERO 6 Touch!
weight holder and enter the machine for repairs or
unscheduled maintenance.
Description Definition
EAC identification Confirms the suitability of the machine for Russia.
Rating plate Machine model, 10-digit ID number, voltage (V),
frequency (Hz), connected load (kW), amperage (A),
max. supply pressure (kPa), degree of protection
(IP), year of manufacture, CE mark, EAC mark, serial
number of the machine, barcode.
Symbols used | MT ZERO 6 Touch | 85
1 695 600 965
en
M P
1 2
X X
X X
X X
X X
M P
1 2
X X
X X
|
2020-02-27