JMA SUPRACODE Manual De Instrucciones página 46

Key manufacturer selector, only those manufacturers appear marked as
active in the application configuration (all by default)
12.5.4 Search results
All the search methods give a list of series that comply with the filters
indicated in the search (may be empty).
Results table with an example search
A) Information on the search filter: shows the filters that have been used to
give these results
B) New search button: if the desired result has not been obtained, you can
return to the search screen using this button.
C) Results list: a list of series that meet the search criteria, with their data. The
total number of results is shown above the list, you may need to scroll down
to see all of them.
D) Favourite indicator: Press this button to select a result as a favourite or
deselect it. Favourites can be found without having to make a search from the
Keychain My Keys button.
The results can be selected from the list, and selecting one will show the
image and other information on the series of the chosen key. Once the correct
series has been selected, confirm the selection in order to proceed to the key
file screen, which is the screen where you work with a key.
If the selected series does not meet the following requirements, you will not
be able to access its file:
• The connected machine is capable of making these types of cuts (e.g.,
SUPRACODE is not compatible with serrated keys)
• The series is not protected or the connected machine has permission to
cut it.
46
Results screen with a selected series.
12.6 MY KEYS/FAVOURITES
This screen is for facilitating use with certain commonly used models, by
clicking on the button
to access this screen, the app will show the series that have been marked as
favourites. This screen functions in the same way as the search results screen,
but without the options relating to the searches.
Favourite screen with the key series marked.
Favourite screen with a selected series.
The series can be selected and deselected as favourites. Once the series with
which you want to work is selected, you only have to confirm the selection to
proceed to the key File screen.