JMA SUPRACODE Manual De Instrucciones página 50

If there is selected and active template for the side that is being cut,
immediately after cutting the key will be marked.
It is important to keep an eye on the movements of the machine to avoid
possible incidents due to errors caused by incompatibilities between the
commands given from the app and the tools present on the machine.
12.8 ENGRAVING/MARKING
The application that controls the SUPRACODE machine allows keys to be
marked directly and marking templates to be configured, which can be used
during the cutting process for the key models for which they have been defined.
12.8.1 List of templates
The template list screen can be accessed from the main screen, which
shows the templates that have been created in the app and their identifying
characteristics, such as their name and related models. It is also the starting
point for the definition of new templates and keys can be marked directly.
A) New template button: Access to template definition and direct marking
(detailed in the following section)
B) Template search filter: free text field for filtering the results list by the
values of the fields defined for the templates.
C) List of templates: List of templates defined in the app that meet the criteria
defined in the search. Each template can be deleted or duplicated with the
action buttons, duplicating the template creates a new template with a name
indicating that it is a duplicate.
50
Reading and cutting screens
Screens
12.8.2 Template editor
Top of the engraving template definition screen.
A) Template header: indicates the name of the template.
B) Template image: displays the image of the bow of the selected key in the
space in which it can be marked and the positioning of the tools to mark in
that space.
C) Field for the template name
D) Key model field: text field for entering the names of the key models that you
want to link, the application makes suggestions as you write the characters
of the name. Once the model that you want to select appears, click on it to
include it in the list of linked models.
E) List of currently linked key models: you can unlink them from the template
by clicking on them.
Bottom of the engraving template definition screen.
A) Marking depth selector: Air marking makes the movements without marking
the key, the other options mark the texts indicated on the key more lightly or
with more depth.
B) Texts to mark: these are the texts to mark on the key, a text is necessary
for something to be marked and the user can define another two independent
texts for marking if required.
C) Text to mark: the specific text that you want to mark, you can also indicate
variables in order to mark the code or other elements depending on the specific
cut.
D) Text position: the text will be marked starting from the reference point and
based on its alignment
1) Alignment of the text with respect to the defined position, you
can mark to the left or to the right.