JMA SUPRACODE Manual De Instrucciones página 49

* fields 1, 2 and 4 only appear if the key has been read, otherwise
they do not appear.
D) Warning indicators: these symbols appear at the side of the deviation
values if there is a value with a high deviation or the deviations conflict (large
positive and negative deviations on the same key).
E) Information on the relationship between the symbol and the active axis
value: displays all the information on the symbols defined by the manufacturer
and their depth values.
F) Drawing of how the cut will turn out and the relevant dimensions of the key:
Displays an approximate preview of how the key will look and its dimensions.
G) Tooling details: displays a screen with information on the tools to use and
how to clamp the key in the machine.
H) Cutter selector: if a file has several cutter options, the cutter selector will
appear with a choice between the normal cutter, or the interpolation cutter if
the normal cutter is not available.
I) Copy number indicator.
J) Cutting start button: starts the cutting process as defined in this key file.
K) Button for modifying cutting axes: it loads the screen where you can
configure whether you want to read or cut "excess" or "less" for each axis.
SELECT ENGRAVING TEMPLATE
You can assign a template to each side of the key, although this is not
necessary. The templates assigned to each side do not necessarily have to be
the same or equal.
Engraving template selector screen (side A)
CUTTER SELECTOR
Depending on the availability of cutter models that the user has, the cutter
indicated in the file may not be available for use. In these cases, the
SUPRACODE has interpolation cutters that can be used to make the cuts
on the key by means of interpolations, instead of making the cuts in one
movement, the paths are calculated and the cuts are made by means of
complex movements.
Cutter selector between the one assigned by default and the interpolation
cutter defined for the key file.
DETAILS
The information on the tools and the placing of the key in the machine can be
consulted on this screen.
Tooling details screen
12.7.3 Reading/cutting process
The app guides the user through the steps necessary for reading or cutting
a key, and indicates at all times the current step of the process and which
configuration of tools the user must put in the SUPRACODE machine. The
necessary information will be displayed by means of auxiliary images and
text on the reading or cutting confirmation screens. Each step indicates the
side of the key that must be clamped and it will be cut when the command is
confirmed at the bottom of the screen.
SUPRACODE
KEY CUTTING MACHINE
49