Publicidad
Idiomas disponibles
Idiomas disponibles
•
The product is heavy and can cause crush injuries.
Be careful when you load it onto or off a vehicle or
trailer.
•
A markets national or local regulations can set limit
to the transportation of the product.
•
The operator of the transport vehicle is responsible
to attach the product safely during transport. Refer to
Transportation on page 29 .
Hauling
•
Use full width ramps for loading and unloading a
product for transport.
Battery safety
WARNING:
cause an explosion and cause injury. If the
battery has a deformation or is damaged,
speak to an approved Husqvarna service
agent.
WARNING:
instructions that follow before you use the
product.
•
Use protective glasses when you are near batteries.
•
Do not wear watches, jewelry or other metal objects
near the battery.
•
Keep the battery out of reach for children.
•
Charge the battery in a space with good airflow.
•
Keep flammable materials at a minimum clearance
of 1 m when you charge the battery.
•
Discard replaced batteries. See
30 .
•
Explosive gases can come from the battery. Do not
smoke near the battery. Keep the battery away from
open flames and sparks.
Safety instructions for maintenance
WARNING:
instructions that follow before you use the
product.
WARNING:
can cause injury or damage to property or
the adjacent area. Do not do maintenance
on the engine or the cutting deck without
these conditions:
•
The engine is off.
•
The product is parked on a level surface.
•
The parking brake is applied.
10
A damaged battery can
Read the warning
Disposal on page
Read the warning
The product is heavy and
•
The ignition key in stop position and
removed.
•
The blades are disengaged.
•
All moving parts have stopped.
•
The ignition cables are removed from the
spark plugs.
WARNING:
pressure may have sufficient force to
penetrate skin and cause serious injury. If
fluid is injected into the skin, seek immediate
medical attention. Keep body and hands
away from pin holes or nozzles that eject
fluid under high pressure. If a leak occurs,
have the product immediately serviced by a
trained technician.
WARNING:
the engine contain carbon monoxide, an
odorless, poisonous and very dangerous
gas. Do not run the product in closed spaces
or spaces with no sufficient air flow.
•
Keep the product in good working order. Replace
worn or damaged parts.
Use caution when servicing blades. Wrap the
blade(s) or wear gloves. Replace damaged blades.
Do not repair or alter blade(s).
If equipped, disconnect spark plug wire(s) and the
negative battery cable before making any repairs.
For best performance and safety, do maintenance
on the product regularly as given in the maintenance
Maintenance schedule on page
schedule. Refer to
15 .
•
Electrical shocks can cause injuries. Do not touch
the cables when the engine is on. Do not do a
function test on the ignition system with your fingers.
•
Let the product become cool before you do
maintenance near the engine.
•
The blades are sharp and can cause cuts. Wind
protection around the blades or use protective
gloves when you do work on the blades.
•
Do not turn the engine over if the spark plug or
ignition cable is removed.
•
Make sure that all nuts and bolts are tightened
correctly and that the equipment is in good condition.
•
Do not change the adjustment of governors. If the
engine speed is too high, the product components
can become damaged. Refer to
page 31 for highest permitted engine speed.
•
The product is approved only with the equipment
supplied or recommended by the manufacturer.
Fluid escaping under
The exhaust fumes from
Technical data on
2374 - 001 - 26.02.2024
Publicidad
