Publicidad
Idiomas disponibles
Idiomas disponibles
Safety instructions for operation on slopes
WARNING:
instructions that follow before you use the
product.
Slopes are a major factor related to accidents. Operation
on slopes requires extra caution.
•
Travel in the manufacturer recommended direction
on slopes. Use caution while operating near
dropoffs.
•
Avoid mowing wet grass. The tires can lose traction.
•
Do not operate product under any condition where
traction, steering, or stability is in question. Tires
could slide even if the wheels are stopped.
•
Always keep the product in gear when going down
slopes. Do not coast downhill.
•
Avoid starting and stopping on slopes. Avoid making
sudden changes in speed or direction. Make turns
slowly and gradually.
•
If the tires lose traction, disengage the blades and
continue slowly straight down the slope.
•
Use extra care while operating product with a grass
catcher or other attachment(s). They can affect the
stability of the product.
•
To cut grass on slopes increases the risk that you
can not control the product and that it overturns. This
can cause injury or death. It is necessary to cut the
grass carefully on all slopes. If you cannot reverse
up a slope or if you do not feel safe, do not cut it.
•
Remove stones, branches and other obstacles.
•
Cut the grass on the slope up and down, not from
side to side.
•
Do not operate the product on ground that slopes
more than 10°.
•
Move smoothly and slowly on slopes.
•
Look out for and do not move across furrows, holes
and bumps. There is a higher risk that the product
overturns on ground that is not flat. Long grass can
hide obstacles.
•
Do not cut grass near edges, ditches or banks. Keep
at least the width of the machine away from these
hazards. The product can suddenly overturn if a
wheel moves across the edge of a steep slope or
a ditch, or if an edge gives way.
Personal protective equipment
WARNING:
instructions that follow before you use the
product.
•
Use approved personal protective equipment when
you use the product. Personal protective equipment
cannot fully prevent injury but it decreases the
degree of injury if an accident does occur. Let your
dealer help you select the right equipment.
8
Read the warning
Read the warning
•
Always wear approved hearing protection. Long term
exposure to noise can result in permanent hearing
impairment.
•
Always wear safety glasses or eye protection while
you operate the product or do maintenance or
repairs.
•
Always wear protective shoes or protective boots.
Steel toes are recommended. Do not use the
product barefoot.
•
Wear gloves when necessary, for example when you
attach, examine or clean the cutting equipment.
•
Do not wear loose-fitting clothing, jewelry or other
items that can get caught in moving parts.
•
Do not wear shorts when you operate the product.
•
Keep first aid equipment and fire extinguisher close
at hand.
Safety devices on the product
WARNING:
instructions that follow before you use the
product.
•
Do not use a product with safety devices that are
damaged or do not operate correctly. Do a check of
the safety devices regularly. If the safety devices are
damaged, speak to your Husqvarna service agent.
•
Do not make modifications on safety devices. Do
not use the product if protective plates, protective
covers, safety switches or other protective devices
are not attached or are damaged.
To do a check of the ignition key
•
Start and stop the engine to do a check of the
ignition key. Refer to
13 and To stop the engine on page 14 .
•
Make sure that the engine starts when you turn the
ignition key to start position.
•
Make sure that the engine stops immediately when
you turn the ignition key to stop position.
Operation conditions
These conditions are necessary to start the engine:
•
The control levers are in the neutral position.
•
The parking brake is applied.
•
The drive of the blades is disengaged.
Read the warning
To start the engine on page
2374 - 001 - 26.02.2024
Publicidad
