Cameo EVOS W7 IP Manual De Usuario página 13

7
PRESSURE EQUALISATION ELEMENT
Pressure equalisation element to prevent condensation inside the housing. In order to ensure its
proper function, the element must be protected from dirt.
8 LC DISPLAY
The illuminated LC display shows the currently activated operating mode (main screen), the menu
items in the selection menu and the numerical value or operating status of certain menu items. If
no entry is made within approximately one minute, the display automatically reverts to the main
screen. Note on the main screen in operating modes with external control: When the control signal
is interrupted, the characters in the display start flashing; when the control signal is present again,
the flashing stops.
The battery-powered display can be activated even if the device is disconnected from the mains.
Press and hold ENTER for about 3 seconds. You can now access device information and modify
and save system settings without a mains connection. The external control of the spotlight is not
activated in this case. For this reason, the display indicates that there is no DMX signal even if a
DMX signal is present at the device input.
9
TOUCH-SENSITIVE CONTROL PANELS
MENU – Press MENU to access the main menu. Press again or repeatedly to return to the main
screen.
UP and DOWN – Select menu items in the main menu (DMX address, operating mode, etc.) and
in the sub-menus using UP and DOWN. Change the value or status of a menu item, e.g. DMX
address.
ENTER – Press ENTER to access the menu level in order to make value or status changes, and to
access one of the sub-menus. Confirm value or status changes by pressing ENTER.
Before navigating the unit menu, make sure that the control panels are dry and clean so that their
functionality is not impaired.
8
9
13