Cameo EVOS W7 IP Manual De Usuario página 17

CONTROL MENU
The control menu is used to select the various operating modes and set their options in the
respective sub-menus. The DMX address, DMX operating mode, universe, IP address and subnet
mask are globally set for all operating modes, where relevant.
DMX OPERATION VIA XLR CABLE
Starting from the main screen, press MENU to enter the main menu. Use UP and DOWN to select
the Control menu and press ENTER. Now select the DMX menu item and confirm again. Informa-
tion on the sub-menu items in the DMX menu and the corresponding setting options can be found
in the table below.
Select with UP and DOWN, confirm with ENTER, change value or status with UP and DOWN,
confirm with ENTER, return with MENU.
Setting the DMX start address
Selecting the DMX mode
Activate (select G3 or G4s) or deactivate (Disable)
the forwarding of the DMX signal via W-DMX, set
the W-DMX standard (G3 / G4s) and establish (Link)
or disconnect (Unlink) a connection with another
W-DMX device.
DMX OPERATION VIA W-DMX
Starting from the main screen, press MENU to enter the main menu. Use UP and DOWN to select
the Control menu and press ENTER. Now select the menu item W-DMX and confirm again. See
the table below for information on the sub-menu items in the W-DMX menu and the correspon-
ding setting options.
17