Cameo EVOS W7 IP Manual De Usuario página 30

Device head
settings
Fan control
Automatic lock-
ing of the rotary
push encoder
Main Menu
Control
Settings
DEVICE INFORMATION (Info)
Info
Starting from the main screen, press MENU to enter the main menu. Use UP and DOWN to select
Info and press ENTER. To display the desired information, select the corresponding submenu item Service
and confirm by pressing ENTER.
Quick-Light
Main Menu
Control
Settings
Info
Service
Quick-Light
Main Menu
Control
Select with UP and DOWN, confirm with ENTER, back with MENU.
Settings
Info
30
Service
Quick-Light
The fan speed is automatically adjusted depending on
the temperature in the device head
Reduced maximum fan speed, resulting in slightly
reduced brightness if necessary
Consistently low fan speed with reduced brightness if
necessary
Deactivates automatic locking
Automatic locking of the rotary-push encoder after 60
seconds without input. Unlock: Press and hold ENTER
Settings
for about 3 seconds.
Display
Signal Fail
Dimmer
Color Calibration
Pan/Tilt Motors
Fan Settings
Auto Lock
Default
Info
Firmware
Temperature
Fan Speed
Runtime
RDM UID, MAC, NET
DMX Values
Error Info
DMX Tables
Service
Reset
Test
Displays the firmware of the device components
Password
Does not reverse pan direction
Reverses pan direction
Does not reverse tilt direction
Reverses tilt direction
Automatic position correction is
enabled
Automatic position correction is
disabled
No blackout during head movement
Blackout during head movement