Sauder 1736-100 Instrucciones De Montaje página 4

S
AUDER WELCOMES YOU TO THE WORLD OF READY- -TO- -ASSEMBLE FURNITURE
A
SSEMBLY IS QUITE SIMPLE IF YOU FOLLOW OUR STEP- -BY- -STEP INSTRUCTIONS
U
NPACK PARTS CAREFULLY TO PREVENT SCRATCHING OF THE FINISHED PIECES
D
O NOT BEGIN ASSEMBLY UNTIL YOU ARE FAMILIAR WITH THE PARTS
E
XTRA TIME SPENT DURING THE ASSEMBLY WILL BE WELL WORTH IT
R
EADY . . . . SET . . . . GO
(XX) 1- -7/8" FLAT HEAD SCREW - - 8
(ZZ) 1- -1/4" MACHINE SCREW - - 2
(BBB) 1- -1/8" MACHINE SCREW - - 1
(DDD) LARGE 1" FLAT HEAD SCREW - - 4
(FFF) 9/16" LARGE HEAD SCREW - - 32
(HHH) 7/16" FLAT HEAD SCREW - - 8
Each time a screw is used, it is shown actual size for you to compare with the screw in your hand. You may receive
some extra hardware. This is done to assure you receive at least the amount required.
NO. 2 PHILLIPS SCREWDRIVER
1736--100
SCREWS SHOWN ACTUAL SIZE
ASSEMBLY TOOLS REQUIRED
(YY) 1- -1/4" FLAT HEAD SCREW - - 8
(AAA) 1- -1/8" PAN HEAD SCREW - - 1
(CCC) SMALL 1" FLAT HEAD SCREW - - 4
(EEE) 7/8" LARGE HEAD SCREW - - 2
(GGG) 1/2" FLAT HEAD SCREW - - 5
(III) NAIL - - 45
TIP SHOWN ACTUAL SIZE
HAMMER
CFCs
The polystyrene foam used in Sauder
packaging contains no CFCs which
are known to reduce stratospheric
ozone layers.