Jocel JC310 Manual De Instrucciones página 45

DAILY UTILISATION
• Do not store inflammable substances or fluids inside the appliance. This would create a risk of
explosion.
• Do not operate other electrical equipment inside the appliance (mixers, whirling rotor for ice
cream, etc.).
• When disconnecting the appliance, grip the plug firmly and do not pull on the cable.
• This appliance is designed for food and beverage storage.
• Do not expose the appliance to direct sunlight.
• Keep the appliance away from candles, luminaires and open flames, in order to avoid fire risk.
• The appliance is heavy. Be careful when moving it.
• If your appliance is equipped with castors, remember that these are only designed to facilitate
minor movements. Do not move the appliance over long distances.
• Do not lean or climb on the appliance or its elements.
• In order to avoid falling objects and to prevent damage to the appliance, do not overload the
compartments of the appliance.
To avoid contamination of food, please respect the following instructions:
• clean regularly surfaces that come in contact with food and accessible drainage systems.
• store raw meat and fish in suitable containers so that it is not in contact with or drip onto other
food.
CAUTION! CLEANING AND SERVICING
• Before carrying out servicing, switch off the power supply and disconnect the appliance.
• When cleaning the appliance, do not use metal objects, steam systems, volatile fluids, organic
solvents or abrasive substances.
• Do not use sharp or pointed objects to remove ice. Use a plastic scraper.
IMPORTANT INFORMATION CONCERNING INSTALLATION!
• To ensure proper electrical connection, follow the recommendations given in the present
manual.
• Unpack the appliance and visually check that it is not damaged. Do not connect a damaged
appliance. Inform your retailer or point of sale of any damage. In such a case, keep the
packaging.
• It is recommended that the appliance be allowed to settle for at least 4 hours before connecting
the electrical power supply, so that the compressor fluid feed is correct.
• Proper air circulation is necessary to avoid overheating. To ensure sufficient ventilation,
observe the installation recommendations provided.
• In order to avoid fire risk, wherever possible, ensure that the appliance is not in contact with
walls or with any hot element (compressor, condenser). Observe the installation
recommendations.
• The appliance should not be placed close to radiators or cooking hot plates or gas rings.
• Check that electrical sockets remain accessible when the appliance is installed.
• This refrigerating appliance is not intended to be used as a built-in appliance.
45