RECOMMENDATION COMBINATION:
The following combination of drawers, baskets, and shelves is recommended for energy to be
used as efficiently as possible by the refrigeration unit.
LEVELING THE APPLIANCE
If your appliance is not leveled, the door and magnetic seal alignment will be
affected and may cause a malfunction. Once the appliance is placed in its final
location, adjust the leveling feet at the front by turning them.
CLEANING BEFORE USE
Wipe the inside of the appliance with a weak solution of bicarbonate of soda. Then rinse with warm
water using a damp sponge or cloth. Wash the baskets and shelves in warm soapy water and dry
completely before replacing them.
BEFORE PLUGGING IN
Check that you have a socket which is compatible with the plug supplied with the appliance. DO
NOT SWITCH ON UNTIL FOUR HOURS AFTER MOVING THE APPLIANCE.
The coolant fluid needs time to settle. If the appliance is switched off at any time, wait 30 minutes
before switching back on to allow the coolant fluid to settle.
BEFORE FILLING YOUR APPLIANCE
Before storing foods in your appliance, turn it on and wait for 24 hours, to make sure it is working
properly and to allow it to reach the correct temperature.
USE INSTRUCTIONS
TEMPERATURE SETTING:
Your combi has two controla for regulating the temperature the fridge compartment and the freezer
compartment. The temperature control is located at the top of the fridge compartment.
50