Publicidad
Idiomas disponibles
Idiomas disponibles
REMOTE CONTROL
Replacement of Batteries
Remove the battery cover plate from the rear of the remote control, by sliding it in direction as
the arrow.
Install the batteries according the direction (+ and ‐)shown on the Remote Control.
Reinstall the battery cover by sliding it into place.
Use 2 pieces LRO3 AAA (1.5V) batteries.
Do not use rechargeable batteries.
Replace the old batteries with new ones of the same
type when the display is no longer legible.
Do not dispose batteries as unsorted municipal waste.
Collection of such waste separately for special
treatment is necessary.
For some models of the remote controller, you can program the temperature display between
o
C and
o
F.
1.
Press and hold the
2.
Press and hold the
3.
Then release the pressing and wait for 5 seconds, the function will be selected.
Note:
1.
Direct the remote control toward the Air conditioner.
2. Check that there are no objects between the remote control and the Signal receptor in the
indoor unit.
3.
Never leave the remote control exposed to the rays of the sun.
4. Keep the remote control at a distance of at least 1m from the television or other electrical
appliances.
button over 5 seconds to get into the change mode;
TURBO
TURBO
button, until it switch to
8
EN - 17
o
C and
o
F;
Publicidad
