Publicidad
Idiomas disponibles
Idiomas disponibles
Inspection After Installation
To ensure a comfortable indoor environment, please run down through the list to check whether the installation of the air
conditioner meets the requirements. Insert a "×" for Fail and a "√" for Pass.
Check Item
Are the IDUs and ODUs securely installed?
Has the installation of the IDU been completed?
Has a leak test been performed?
Is the heat insulation in good condition (refrigerant piping,
drainage pipe, and air ducts)?
Were the copper pipes sealed before installation to
prevent dust from entering?
Is the refrigerant piping filled with nitrogen for shielded
welding during the welding process (a nitrogen cylinder is
on site)?
Has a water discharge test been performed? Is drainage
smooth? Is the connection secure?
Is the power supply voltage consistent with the specified
voltage on the unit nameplate?
Are the wires and pipes connected correctly?
Is the air conditioner safely grounded?
Have wires of the specified size been used?
Are the terminal screws securely fastened?
Are the inlets and outlets of the IDUs and ODUs free
of obstruction?
Has the refrigerant piping length and refrigerant charge
been recorded?
Does the temperature of each room meet the
requirements during testing?
Have you explained to the user how to operate the unit
according to the user manual?
Have you explained to the user how to use and clean
the air filter?
Check Criteria
The air conditioner does not fall or
vibrate, and there is no noise.
The unit works properly and no
parts are burned out.
The cold/hot air is sufficient.
There is no condensation dripping.
The compressor is functional.
There is no oxide film on the inner
surface of the copper pipe. The
system is functional with no major
failures.
There is no water leakage.
The unit works properly and no
parts are burned out.
The unit works properly and no
parts are burned out.
There is no electric leakage.
The unit works properly and no
parts are burned out.
There is no electric shock or fire.
The cold/hot air is sufficient.
The amount of refrigerant in the air
conditioning system is clear.
Users' comfort needs can be
satisfied.
The unit is effective.
The unit is effective.
62
Installation
Check Result
(Pass/Fail)
Publicidad
