Publicidad
Idiomas disponibles
Idiomas disponibles
Maintenance of Motor and Wind Wheel
1
Pull the plug of the motor, electronic expansion valve and each temperature sensing line out of the electric control
board, pull out the drainage pipe from the chassis outlet, push the buckle of the drain pan assembly upward so that
the buckle is separated from the chassis, and then pull the drain pan assembly out horizontally.
Buckle
[ Caution ]
Dismantle the motor cable at position A before you dismantle the drain pan assembly. The sensor cable at position B
may not be removed. Carefully hang the drain pan assembly.
2
Lift and pull out the box containing the silver ion deodorizer for maintenance.
3
Loosen the screw (one), pull the evaporator horizontally a little and hang the evaporator.
A
Buckle
Evaporator
Screw (one)
70
Cleaning, Maintenance and After-Sales Service
B
Buckle
Drain pan assembly
Silver ion deodorizer
(optional)
Publicidad
