Publicidad
to the position of the whole travel. One tenth to Nine tenth of the whole travel etc.
4. Partial open/height
"0" appears on the display means close the partial open function. Display "1~9" means to set the different partial
open position of the whole travel.
5. Transmitter button recognition function
"0" appears on the display means the buttons recognition function is closed. Display "1"
means the buttons recognition function is open.
6. Codes memory quantity
"A" appears on the display means the maximal code memory quantity is 50pcs. Press UP/DOWN button once,
to increase or decrease quantity. The code memory quantity is set on 5pcs*N, N=1~9. (The quantity is the
multiple of 5).
7. Maintenance alarm
"t" appears on the display and led light flashes 10 times quickly means the garage door and motor need total
maintenance.
8. Automatic safety reverse
Automatic stop / automatic reverse are controlled by our software of circuit boards. We are circumspect to
protect your children, pet or other goods.
9. Soft start / Soft stop
Ramping speed up and down at the start and end of each cycle reduces stress on the door and opener for longer
life and makes for quieter operations.
10. Auto Close
Auto- Close ensures peace of mind and keeps your house secure by automatically closing the door upon entering
or exiting the garage.
11. Self-learning open and close obstruction force
The amount of opener power for different stages of the door's travel is learned during setup and is constantly
re-profiled. Opener force measurement automatically adjustment in a suitable range.
12. Electronic limit, simple adjustment
You only need control the limit setup from control panels to adjust it exactly, the simple and quick process for
any peoples.
13. Battery backup available
Openers could be supplied power with our battery backup once the power failure at your home.
14. Self-Lock in gear motors
Gear motor will self-lock with its disengagement systems.
15. Manual release
Don't worry about the power failure, the manual release system is a solution for operation the door at any
time.
16. Transmitter technology
Rolling Code technology (7.38 x 10
you can control 4 different doors with one transmitter.
17. Applications
With as little as 30mm required between the ceiling and the highest point of the door travel, the opener
can be flush mounted for low headroom applications.
18. Metal bottom plate, stronger and security.
EN
19
Combinations), 433.92 MHz frequency, 4 channels design to ensure
Publicidad
