Publicidad
EN
A. SOFT STOP DISTANCE ADJUSTMENT
a) Long press the SET buton un�l "1"
appears on the display, and then press the
UP buton con�nuously un�l "A" is showed
on the display to enter the func�on se�ng.
b) Press the SET buton again, now you have
entered the so� stop distance se�ng menu,
and you will see the number "2" appear on
the display.
c) Press the UP/DOWN buton to select the
so� stop distance, you can choose from the
level "1-3", the ini�al default is "2", which
means the so� stop distance is medium.
The number "1" means the so� stop distance
is long.
The number "2" means the so� stop distance
is medium.
The number "3" means the so� stop distance
is short.
d) Press SET buton to confirm the se�ng.
NOTE: Once finished setting, you will need to
relearn the door travel limits, then the soft
stop distance will work with your new
settings.
1 – Increase
2 – Decrease
Publicidad
