Publicidad
EN
Option 2 - Side Fixed (For Lead-acid & Lithium Battery)
STEP1 (Fig.11)
Assemble the batery to the side of the opener like the photo, fix by screws supplied.
STEP2 (Fig.12)
Join the battery to opener, find the Fig.12.
Figure 11
Figure 12
MANUAL DISENGAGEMENT FOR C-RAIL OPENER
The opener is equipped with a manual release cord to disengage shutle and move door by
hand while holding the handle down (Fig 13). Pull on the handle to disengage the shutle. To
re-engage the door simply run opener in automa�c mode or move door by hand un�l the trolley
engages in the chain shutle.
In some situa�ons that a pedestrian door is not in state, it is recommended that an external
disengagement device should be fitted (Fig 14).
Publicidad
