MSW Motor Technics MSW-GDOOR-001A Manual De Instrucciones página 48

3. As per Fig. 9, release the nut & spring.
4. Tight the nut to the right posi�on as shown in Fig.10, cut the plas�c tape, cut the plas�c thread on
sprocket, then whole rail assembled finished.
Figure 9
Battery Backup Assembly for C-Rail (optional)
Option 1 - Top Fixed (For Lead-acid Battery ONLY)
STEP 1
Assemble the batery & batery bracket like the photo, fix by screws supplied.
STEP 2
Join the batery to opener.
Step 1
EN
Figure 10
Step 2