Publicidad
Idiomas disponibles
Idiomas disponibles
3 Donning
WARNING!
DO NOT use the respirator unless the regulator is connected properly. A regulator that is not installed correctly can
separate from the facepiece unexpectedly. Return the respirator to an MSA trained or certified repairperson to correct the
condition.
Failure to follow this warning can result in serious personal injury or death.
8. Inhale sharply to start the airflow.
3.7.2
Installing the Firehawk Regulator - Push-To-Connect
1. Grasp the Firehawk Regulator and insert the regulator into the facepiece by pushing inward. Check proper
engagement by pulling on the regulator to ensure that the regulator is securely attached to facepiece.
WARNING!
DO NOT use the air mask unless the regulator is connected properly. A regulator that is not installed correctly can separate
from the facepiece unexpectedly. Return the air mask to an MSA trained or certified repairperson to correct the condition.
Failure to follow this warning can result in serious personal injury or death.
2. Inhale sharply to start the airflow.
3.7.3
Installing the G1 Regulator
WARNING!
DO NOT use a G1 Regulator with an Ultra Elite or Advantage 4000 Facepiece.
Failure to follow this warning can result in serious personal injury or death.
1. Push the release buttons on the regulator to ensure the regulator is shut off.
2. Open the bypass knob (counterclockwise), and ensure that air flows from the regulator.
3. Close the bypass knob (clockwise).
WARNING!
There must be a continuous flow of air when the bypass knob is opened. If not, do not use a respirator.
Failure to follow this warning can result in serious personal injury or death.
14
4. Grasp the regulator and insert it into the facepiece by pushing inward. If properly
aligned the bypass knob will show on the right side of the user's facepiece.
PremAire Cadet
US
Publicidad
