Publicidad
Idiomas disponibles
Idiomas disponibles
3 Donning
WARNING!
If the respirator does not function properly, the respirator must be removed from service and the condition must be checked
and corrected by an MSA trained and certified repair person before using.
Failure to follow this warning can result in serious personal injury or death.
3.4
Donning the Facepiece
WARNING!
• DO NOT use a cover lens in a high-temperature environment. High temperatures may distort the cover lens. Or,
moisture trapped between a cover lens and the facepiece lens may condense and distort vision. Always remove the
cover lens before donning the facepiece.
• This device may not seal properly with your face if you have a beard, gross sideburns, or similar physical
characteristics (see ASTM F3387). An improper facial seal may allow contaminants to leak into the facepiece,
reducing or eliminating respiratory protection. Do not use this device if such conditions exist. The face-to-facepiece
seal must be tested before each use. Never remove the facepiece except in a safe, non-hazardous, non-toxic
atmosphere.
• Ensure that the top of the facepiece seal directly contacts the user's forehead. Ensure that there is no hair between
the facepiece's seal and the user's skin.
Failure to follow this warning can result in serious personal injury or death.
WARNING!
DO NOT wear eyeglasses under the facepiece. The temples or sidebars on eyeglasses will prevent an air-tight seal. If you
must wear glasses, install the spectacle kit.
Before using a spectacle kit, an optometrist must inspect the spectacle kit and prescribe the correct lenses to fit into the
lens frame on the spectacle kit.
Failure to follow this warning can cause inhalation of contaminated air, resulting in serious respiratory injury or
death.
10
1. Spread the harness with both hands.
2. Position the chin into the chin cup.
PremAire Cadet
US
Publicidad
