Publicidad
Idiomas disponibles
Idiomas disponibles
5 Cleaning and Disinfecting
4.1.4
Removing the Facepiece
4.2
Removing the Belt
To remove the belt, press the belt buckle release button IN.
NOTE: If the PremAire System Respirator is being used, refer to P/N 496958 for more details.
5
Cleaning and Disinfecting
Depending on the cleaning policy adopted, either a designated person or the user should clean the respirator after each
use to limit exposure to possible contamination that may be present on the unit after use. ANSI standards suggest that
users should be trained in the cleaning procedure. Confidence Plus Cleaning Solution (P/N 10009971) from MSA is
recommended. It cleans and disinfects in one operation. It retains its germicidal efficiency in hard water to inhibit the growth
of bacteria. It will not deteriorate rubber, plastic, glass, or metal parts. Refer to the label to prepare the Confidence Plus
Cleaning Solution. If the Confidence Plus Cleaning Solution is not used, wash in a mild cleaning solution, rinse thoroughly.
Submerge the facepiece in a germicide solution for the manufacturer's recommended time.
18
1. Loosen the head harness by pulling the buckles forward using your fingers.
2. Grip the chin straps and pull the head harness forward over the head.
3. Grip the front of the facepiece (as shown) and pull the facepiece away and down
from the user.
PremAire Cadet
US
Publicidad
