Publicidad
Idiomas disponibles
Idiomas disponibles
100.0
Target Torque Screen
ENTER button
PSET 01 01
100.0
Preset Torque Screen
Adding an Angle Preset
1. From target angle screen, press and hold UNITS
2. ADD PRESET confirmation screen is displayed. Highlight
buttons then press ENTER
PSET.
3. MINIMUM ANGLE screen is displayed. MINIMUM ANGLE is target value at which green progress
lights, audible alert and vibrator turn on. Initial MINIMUM ANGLE value is value from target angle
screen. MINIMUM ANGLE can be set from 0 to 360° by pressing UP
desired target angle value has been set, press ENTER
4. MAXIMUM ANGLE screen is displayed next. MAXIMUM ANGLE is angle value above which red
progress lights turn on. Initial MAXIMUM ANGLE value will be MINIMUM ANGLE plus 4%. Maximum
angle value can be set to any value greater than MINIMUM ANGLE by pressing
UP
/DOWN
5. BATCH COUNT screen is displayed next. Default value is zero. Batch count range is 0 to 99. Press
UP
/DOWN
target angle is reached if a batch count of zero is entered. Mode Count is displayed as 01ofXX if a
non-zero batch count is entered and resets to 01 after batch count completed. Once desired value
has been set, press ENTER
6. PSET target screen is displayed labeled with next available PSET number from 01 to 10.
7. To enter additional angle presets, repeatedly press ENTER
displayed and repeat steps above.
90°
Target Angle Screen
ENTER button
PSET 02 01
90°
Preset Angle Screen
UNIT
00
ADD PRESET
button
held
YES
FT-LB
NO
ADD PRESET
YES
NO
03
of
FT-LB
button.
buttons. Once desired value has been set, press ENTER
buttons to increment/decrement batch count. Mode Count increments each time
button.
UNIT
00
ADD PRESET
button
held
YES
NO
ADD PRESET
YES
NO
04
of
UP/DOWN buttons
ENTER
button
MINIMUM TORQUE
100.0
ENTER button
U
button for 3 seconds.
YES
NO
menu selection returns to main menu without adding a
UP/DOWN buttons
ENTER
button
MINIMUM ANGLE
90°
ENTER button
10
UP/DOWN buttons
ENTER
button
104.0
FT-LB
BATCH COUNT
3
menu selection using UP
/DOWN
button.
button until target angle screen is
UP/DOWN buttons
ENTER
button
MAXIMUM ANGLE
BATCH COUNT
4
UP/DOWN buttons
MAXIMUM TORQUE
FT-LB
ENTER
button
UP/DOWN buttons
/DOWN
buttons. Once
button.
UP/DOWN buttons
94°
ENTER
button
UP/DOWN buttons
Publicidad
