Publicidad
Idiomas disponibles
Idiomas disponibles
Editing a Preset
Edit PSET function gives user ability to edit stored PSETS on wrench.
1. From Preset screen to be edited, press and hold UNITS
2. CHANGE PRESET screen is displayed.
3. Highlight
EDIT
selection using UP
4. MINIMUM TORQUE or ANGLE screen is displayed. Value can be changed by pressing UP
buttons. Once desired target torque or angle value has been set, press ENTER
5. MAXIMUM TORQUE or ANGLE screen is displayed next. Value can be changed by pressing UP
/DOWN
buttons. Once desired target torque or angle value has been set, press
ENTER
button.
6. BATCH COUNT screen is displayed next. Value can be changed by pressing UP
buttons. Once desired batch count value has been set, press ENTER
7. PSET target screen is displayed labeled with same PSET number.
PSET 02 01
04
of
90°
Preset Angle Screen
PSET 02
00
92°
Preset Angle Screen
Note: Pressing ENTER
PSET.
Deleting a Preset
Delete PSET function allows user to remove stored presets from wrench.
1. From Preset screen to be deleted, press and hold UNITS
2. CHANGE PRESET screen is displayed.
3. Highlight
DELETE
4. Target screen is displayed and deleted PSET is no longer available for selection.
PSET 02
92°
Preset Angle Screen
100.0
FT-LB
Target Screen
Note: Pressing ENTER
PSET.
Note: When a PSET is deleted, all other stored PSET's will retain their original PSET numbers. When a
new PSET is entered, it will be assigned first available PSET number in sequence.
/DOWN
UNIT
CHANGE PRESET
button
DELETE
held
EDIT
EXIT
UP/DOWN buttons
CHANGE PRESET
DELETE
EDIT
EXIT
ENTER button
button while
menu selection using UP
UNIT
00
CHANGE PRESET
button
DELETE
held
EDIT
EXIT
UP/DOWN buttons
CHANGE PRESET
DELETE
EDIT
EXIT
00
ENTER button
button while
U
buttons then press ENTER
ENTER
button
MINIMUM ANGLE
92°
EXIT
menu selection is highlighted will exit without editing
U
/DOWN
ENTER button
EXIT
menu selection is highlighted will exit without deleting
11
button for 3 seconds.
button.
UP/DOWN buttons
ENTER
MAXIMUM ANGLE
button
94°
BATCH COUNT
0
button for 3 seconds.
buttons and press ENTER
button.
/DOWN
button.
/DOWN
UP/DOWN buttons
ENTER
button
UP/DOWN buttons
button.
Publicidad
