Publicidad
Idiomas disponibles
Idiomas disponibles
Setting LCD Contrast
This function will allow user to set LCD contrast for optimal viewing.
1. From Settings menu, use UP
ENTER
button.
2. CONTRAST screen is displayed.
3. Use UP
/DOWN
Selectable levels: 20 to 80 in increments of 5 (factory default = 40).
4. Press ENTER
button to accept selection and exit to Settings menu.
EXIT
SHOW INFO
SLEEP TIME
LCD CONTRAST
UP/DOWN buttons
EXIT
SHOW INFO
SLEEP TIME
LCD CONTRAST
ENTER
button
Key Beep Setup
This function will allow user to enable or disable audio feedback when a button is pressed.
1. From Settings menu, use UP
ENTER
button.
2. KEY BEEP screen is displayed.
3. Use UP
/DOWN
4. Press ENTER
button to accept selection and exit to Settings menu.
EXIT
SHOW INFO
SLEEP TIME
LCD CONTRAST
UP/DOWN buttons
SHOW INFO
SLEEP TIME
LCD CONTRAST
KEY BEEP
ENTER
button
Auto Backlight Setup
This function will allow user to enable or disable backlight from turning on during torque or angle
measurement.
1. From Settings menu, use UP
press ENTER
button.
/DOWN
buttons while viewing display to change contrast to desired level.
ENTER
CONTRAST:
button
UP/DOWN buttons
CONTRAST:
/DOWN
buttons to highlight ENABLE (factory default) or DISABLE selection.
KEY BEEP
ENTER
button
ENABLE
DISABLE
UP/DOWN buttons
KEY BEEP
ENABLE
DISABLE
/DOWN
buttons to highlight
20
80
buttons to highlight
buttons to highlight
14
LCD CONTRAST
selection then press
KEY BEEP
selection then press
AUTO BACKLIGHT
selection then
Publicidad
