Publicidad
Idiomas disponibles
Idiomas disponibles
Advanced Configuration
Accessing Advanced Configuration
Advanced configuration is accessed from
1. From target torque or angle screen, press and hold ENTER
2. Highlight
CONFIGURE
3. Press ENTER
button to display Configure menu.
Menu Selections:
EXIT - Exits Configure menu and returns to target torque or angle screen.
MODE SETUP - Displays wrench mode setup menu.
DELETE PRESETS - Displays delete all presets menu.
CALIBRATION - Displays wrench calibration menu (password protected).
SET DATE/TIME - Displays clock date and time entry screens.
SET CAL INTRVAL - Displays calibration interval setup screen (requires clock date and time
setup).
4. To exit Configure menu and return to target torque or angle screen, press ENTER
EXIT
menu selection is highlighted.
100.0
FT-LB
Target Screen
Note: All user configurable settings are stored in non-volatile memory and are retained while power
is off.
Mode Setup
Mode setup menu allows user to enable/disable Torque THEN angle mode.
1. From Configure menu, press ENTER
2. Mode Setup menu is displayed.
Menu Selections:
EXIT - Exits Mode setup menu and returns to Configure menu screen.
THEN DISABLED - Displays THEN Mode enable/disable screen.
3. Use UP
/DOWN
4. Press ENTER
button while
EXIT
MODE SETUP
DELETE PRESETS
CALIBRATION
Configure menu
Enable/Disable Torque THEN Angle Mode
This function will allow user to enable or disable Torque THEN Mode.
1. From Mode Setup menu, use UP
(factory default) then press ENTER
2. TQ THEN ANGLE enable/disable screen is displayed.
3. Use UP
/DOWN
menu selection using UP
ENTER
00
EXIT
button
SET HEAD LENGTH
held
SHOW DATA
CLEAR DATA
UP/DOWN buttons
CYCLE COUNT
LANGUAGE
SETTINGS
CONFIGUREs
buttons to highlight menu selections.
EXIT
menu selection is highlighted to return to Configure menu.
ENTER
EXIT
button
THEN DISABLED
Mode Setup menu
buttons to select ENABLE or DISABLE selection.
CONFIGURE
menu selection on main menu.
/DOWN
ENTER
EXIT
button
MODE SETUP
DELETE PRESETS
CALIBRATION
Configure menu
button while
MODE SETUP
/DOWN
buttons to highlight
button.
17
button for 3 seconds.
buttons.
selection is highlighted.
THEN DISABLED
button while
selection
Publicidad
