Publicidad
Idiomas disponibles
Idiomas disponibles
Advanced Settings
Accessing Advanced Settings
Advanced settings are accessed from
1. From target torque or angle screen, press and hold ENTER
2. Highlight
SETTINGS
3. Press ENTER
button to display Settings menu.
Menu Selections:
EXIT - Exits Settings menu and returns to target screen.
SHOW INFO - Displays wrench operational information.
SLEEP TIME - Displays power down interval setup screen.
LCD CONTRAST - Displays LCD contrast setup screen.
KEY BEEP - Displays button press beep enable/disable setup screen.
AUTO BACKLIGHT - Displays auto backlight enable/disable screen to turn on backlight during
measurement.
TOGGLE BACKLGHT - Displays BACKLIGHT
screen.
VIBRATOR CONFIG - Displays vibrator ON/OFF configuration for when target reached.
BATTERY TYPE – Displays the battery type selection screen.
4. To exit Settings menu and return to target torque or angle screen, press ENTER
EXIT
menu selection is highlighted.
100.0
Target Screen
Note: All user configurable settings are stored in non-volatile memory and are retained while power
is off.
Show Info
Show Info menu selection displays wrench operational information.
1. From Settings menu, press ENTER
2. SHOW INFO screen is displayed.
3. UP
/DOWN
Operational Information:
CAL: Date of last wrench calibration.
ISD: In-Service Date.
TCF: Torque Calibration Factor.
ACF: Angle Calibration Factor.
VER: Software version.
OVR CNT: Overtorque Counter tracks how many times an over-torque event occurred on
wrench (torque >125% of full scale).
TQZ: Torque Zero Offset.
AZZ: Z-Axis Angle Zero Offset.
AZX: X-Axis Angle Zero Offset.
AZO+: Gyro Zero Offset at CW full scale torque.
SETTINGS
menu selection using UP
ENTER
00
EXIT
button
SET HEAD LENGTH
held
SHOW DATA
FT-LB
CLEAR DATA
CLEAR DATA
CYCLE COUNT
LANGUAGE
SETTINGSs
buttons are used to scroll screen.
menu selection on main menu.
/DOWN
button toggle or timeout enable/disable
UP/DOWN buttons
EXIT
ENTER
button
SHOW INFO
SLEEP TIME
LCD CONTRAST
Settings menu
button while
SHOW INFO
12
button for 3 seconds.
buttons.
selection is highlighted.
button while
Publicidad
