Publicidad
Idiomas disponibles
Idiomas disponibles
BEFORE FIRST USE
Dishwashing salt
• If your model does not have a salt container, you can skip this section. Always use
salt suitable for dishwashers. The salt container is located below the lower dish
compartment and should be filled as follows:
• Only use salt that is specifically designed for use in dishwashers. Any other type of
salt, especially table salt, will damage the container. Damage caused by the use of
unsuitable salt is not covered by the manufacturer's warranty.
• Only fill the appliance into the container before starting the dishwasher. This
prevents salt or salt water, which may have been spilled, from remaining on the
bottom of the dishwasher for a long period of time and causing wear and tear.
Filling up the rinsing salt container
1. Remove the dish insert and unscrew the cover of the container.
2. Insert the bottom of the funnel (included) into the hole and pour in about 1 kg of
dishwashing salt.
3. Fill the salt container to the top with water before using the appliance for the first
time. It is normal for a small amount of water to leak out of the salt container.
4. After filling, screw the cover firmly back onto the container.
5. After the salt container has been filled with salt, the warning light goes off.
6. A cleaning programme should be started immediately after the container has been
filled with salt. (We recommend using a short programme.) Otherwise, the filter
system, the pump or other appliance components may be damaged by the salty
water. In such cases, the warranty claim becomes invalid.
EN
49
Publicidad
