Klarstein AMAZONIA 8 Manual Del Usuario página 69

Problem
The glass is fogged up.
Black or grey stripes on
dishes
Detergent residues in the
chamber.
Error codes
For some faults, the display shows an error code to warn you:
Code Meaning
E1 The water intake takes a
very long time.
E3 The required temperature
is not reached.
E4 The dishwasher is leaking. An element of the dishwasher is not sealed
Ed Fault in communication
between main circuit
board and display circuit
board.
• If water runs out, first shut off the water supply before contacting customer service
or a specialist company.
• If there is water in the base pan due to overfilling or a small leak, remove it before
restarting the dishwasher.
• If an error code cannot be cleared, contact a professional dealer for repair.
Potential cause
Combination of soft water
and too much detergent.
Aluminium parts have
rubbed against the dishes.
The dishes are obstructing
the dissolution of the
detergent.
Potential cause
The tap is not open, the water inlet is
restricted or the water pressure is too low.
Malfunction of the heating element.
and is and leaking.
Open circuit or interrupted wiring for
communication.
Solution
Use less detergent and use
the shortest programme to
wash and clean the glass.
Use a mild abrasive
cleaner.
Load the dishes carefully
into the dishwasher.
EN
69